Which pipe has better anti-settling performance? Today, let's Jiecheng Plastic, a pipe manufacturer in Fujian, tell you about the carat pipe.
    The forming process of carat tube is synchronous molding at constant temperature, without welds. The pipe structure of the carat pipe is based on the PE structural wall as the main support of the pipe. The carat tube is very resistant to acid and alkali corrosion, and at a temperature of 60°C, it is stable against any acid and alkali. The resistance of carat tubes to galvanic corrosion is also relatively stable. Carat fittings are very resistant to acids and alkalis (stable). Carat pipe joints are also highly resistant to galvanic corrosion (stable). The sealing performance of the carat pipe fitting is very good. Carat tubes can last more than 50 years.

There are three points that can be illustrated about the anti-sedimentation ability of carat tubes, namely:
    1. The mouth of the carat pipe joint socket is completely fused, and the stiffness and strength at the interface are consistent with the pipe body, which belongs to the body connection. When the carat pipe is deformed by force, the deformation is smoothly dispersed to the whole section of the pipe through the joint, and the stress concentration will not be formed at the joint.
    2. In areas with complex geological conditions such as soft foundation or tidal flats, uneven settlement of the foundation often occurs, and the use of socket-type electrofusion connection carat pipe gives full play to its flexible characteristics like a pipe and adapts to geological changes. In earthquake-prone areas, the buried laying of frequent heavy loads, the carat tube connected by socket type electrofusion has strong impact resistance.
    3. The carat pipe with socket type electrofusion connection can really make the construction fast, so that the pipe can be laid and backfilled while excavating. Because the interface is connected by the body, the ability to resist stress is strong, the pipeline can be welded on the edge of the groove, and then put into the groove with a section of pipe, and the pipeline only pays attention to the quality of the backfill, but does not pay attention to the flatness of the trench, which reduces the amount of excavation.
    Fujian Jiecheng Plastic is a professional engaged in plastic pipes, carat pipes, marine pedals, steel belt pipe production, research and development, sales, installation in one of the technology-based enterprises, as a professional supplier of Fujian pipes, our company has become a local professional carat pipe manufacturers, steel belt pipe manufacturers in Fujian, to provide you with high-quality marine pedals, municipal pipes, sewage pipes, etc.