The steel strip pipe is suitable for the medium with a long-term temperature of no more than 45°C; The buried plastic drainage pipe should be designed according to the theory of flexible pipe (pipe and soil work together). At the same time, the change in the vertical direction of the pipeline in the design state shall not be greater than 5% of the pipe diameter; Steel strip pipe manufacturers.

The selection of pipe ring stiffness is an important index of plastic pipe design, so it should be determined from the comprehensive consideration of pipeline burial depth, ground load, the nature and compaction coefficient of trench backfill, and construction load. Blind adoption of high ring stiffness is not economical. For pipelines with a buried depth of less than 1.0m under the roadway, the influence of pipeline deformation on the road surface should also be considered;

Compared with other plastic pipes, steel strip pipe is one of the small number of plastic pipes that can achieve DN300mm-DN3000mm full diameter, and has obvious advantages in the field of large-diameter plastic buried drainage pipes. The steel belt pipe is not corroded by pollution, waste water and chemicals, and is not corroded by decaying substances in the soil. The pipe wall is made of "U" shaped structure, which is impact-resistant, pressure-resistant, and does not break in the case of foundation sinking, and has strong recovery after deformation, and has good adaptability to the foundation.

Steel belt corrugated pipe, also known as steel belt reinforced polyethylene spiral corrugated pipe, is a kind of high-density polyethylene (PE) as the matrix (inner and outer layer) and the surface coated and bonded resin steel belt composite winding structural wall pipe. The raw materials used in the production of steel strip pipe manufacturers should be mainly polyethylene (PE) resin, which can only add additives necessary to improve performance.